Highly Selective Zeolite Topologies for Flue Gas Separation

The separation of carbon dioxide from flue gas is essential for the reduction of greenhouse gas emissions. In adsorptive methods, the challenge lies in the choice of suitable porous materials. Among all zeolite topologies, a number of adsorbents with pore dimensions in the range of the guest molecules were identified to allow an excellent separation by diffusion, and MRE and AFO zeolite topologies appear to be the best candidates based on equilibrium adsorption. Also, it was found that the behavior of this gas mixture in DFT and APD zeolites differed from the normal behavior.     

Separation of Amyl Alcohol Isomers in ZIF‐77

The separation of pentanol isomer mixtures is shown to be very efficient using the nanoporous adsorbent zeolitic imidazolate framework ZIF‐77. Through molecular simulations, we demonstrate that this material achieves a complete separation of linear from monobranched—and these from dibranched—isomers. Remarkably, the adsorption and diffusion behaviors follow the same decreasing trend, produced by the channel size of ZIF‐77 and the guest shape. This separation based on molecular branching applies to alkanes and alcohols and promises to encompass numerous other functional groups.     

Green Approach to the Fabrication of Superhydrophobic Mesh Surface for Oil/Water Separation

We report a simple and environment friendly method to fabricate superhydrophobic metallic mesh surfaces for oil/water separation. The obtained mesh surface exhibits superhydrophobicity and superoleophilicity after it was dried in an oven at 200 °C for 10 min. A rough silver layer is formed on the mesh surface after immersion, and the spontaneous adsorption of airborne carbon contaminants on the silver surface lower the surface free energy of the mesh. No low‐surface‐energy reagents and/or volatile organic solvents are used. In addition, we demonstrate that by using the mesh box, oils can be separated and collected from the surface of water repeatedly, and that high separation efficiencies of larger than 92 % are retained for various oils. Moreover, the superhydrophobic mesh also possesses excellent corrosion resistance and thermal stability. Hence, these superhydrophobic meshes might be good candidates for the practical separation of oil from the surface of water.     

Immobilization of Distinctly Capped CdTe Quantum Dots onto Porous Aminated Solid Supports

Immobilization of quantum dots (QDs) onto solid supports could improve their applicability in the development of sensing platforms and solid‐phase reactors by allowing the implementation of reusable surfaces and the execution of repetitive procedures. As the reactivity of QDs relies mostly on their surface chemistry, immobilization could also limit the disruption of solution stability that could prevent stable measurements. Herein, distinct strategies to immobilize QDs onto porous aminated supports, such as physical adsorption and the establishment of chemical linking, were evaluated. This work explores the influence of QD capping and size, concentration, pH, and contact time between the support and the QDs. Maximum QD retention was obtained for physical adsorption assays. Freundlich and Langmuir isotherms were used to analyze the equilibrium data. Gibbs free energy, enthalpy, and entropy were calculated and the stability of immobilized QDs was confirmed.     

Adsorption of the anionic surfactant sodium dodecyl sulfate on a C18 column under micellar and high submicellar conditions in reversed‐phase liquid chromatography

Micellar liquid chromatography makes use of aqueous solutions or aqueous‐organic solutions containing a surfactant, at a concentration above its critical micelle concentration. In the mobile phase, the surfactant monomers aggregate to form micelles, whereas on the surface of the nonpolar alkyl‐bonded stationary phases they are significantly adsorbed. If the mobile phase contains a high concentration of organic solvent, micelles break down, and the amount of surfactant adsorbed on the stationary phase is reduced, giving rise to another chromatographic mode named high submicellar liquid chromatography. The presence of a thinner coating of surfactant enhances the selectivity and peak shape, especially for basic compounds. However, the risk of full desorption of surfactant is the main limitation in the high submicellar mode. This study examines the adsorption of the anionic surfactant sodium dodecyl sulfate under micellar and high submicellar conditions on a C₁₈ column, applying two methods. One of them uses a refractive index detector to obtain direct measurements of the adsorbed amount of sodium dodecyl sulfate, whereas the second method is based on the retention and peak shape for a set of cationic basic compounds that indirectly reveal the presence of adsorbed monomers of surfactant on the stationary phase.     

Evaluation of an activated carbon from olive stones used as an adsorbent for heavy metal removal from aqueous phases

The performance of a microporous activated carbon prepared chemically from olive stones for removing Cu(II), Cd(II) and Pb(II) from single and binary aqueous solutions was investigated via the batch technique. The activated carbon sample was characterized using N₂ adsorption–desorption isotherms, SEM, XRD, FTIR, and Boehm titration. The effect of initial pH and contact time were studied. Adsorption kinetic rates were found to be fast and kinetic experimental data fitted very well the pseudo-second-order equation. The adsorption isotherms fit the Redlich–Peterson model very well and maximum adsorption amounts of single metal ions solutions follow the trend Pb(II) > Cd(II) > Cu(II). The adsorption behavior of binary solution systems shows a relatively high affinity to Cu(II) at the activated carbon surface of the mixture with Cd(II) or Pb(II). An antagonistic competitive adsorption phenomenon was observed. Desorption experiments indicated that about 59.5% of Cu(II) and 23% of Cd(II) were desorbed using a diluted sulfuric acid solution.     

In situ infrared study of formate reactivity on water–gas shift and methanol synthesis catalysts

In order to investigate the methanol synthesis reaction from CO₂/H₂, a comparative study of the reactivity of formate species on different types of catalysts and catalyst supports has been carried out. Formic acid was adsorbed on water–gas shift catalysts, Cu/ZnO/Al₂O₃ methanol synthesis catalyst and ZnO/Al₂O₃ support, Cu/ZnO/ZrO₂ and Cu/ZnO/CeO₂ methanol synthesis catalysts as well as their corresponding supports ZnO/ZrO₂ and ZnO/CeO₂. Superior reactivity and selectivity of dedicated methanol synthesis catalysts was evidenced by their behavior during the subsequent heating ramp, when these samples showed the simultaneous presence of formates and methoxy species and a higher stability of these reaction intermediates in the usual temperature range for the methanol synthesis reaction.     

Tuning CO2 Uptake and Reversible Iodine Adsorption in Two Isoreticular MOFs through Ligand Functionalization

The synthesis and characterization of two isoreticular metal–organic frameworks (MOFs), {[Cd(bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 1 ) and {[Cd(2‐NH₂bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 2 ) [bdc=benzene dicarboxylic acid; 2‐NH₂bdc=2‐amino benzene dicarboxylic acid; 4‐bpmh=N,N‐bis‐pyridin‐4‐ylmethylene‐hydrazine], are reported. Both compounds possess similar two‐fold interpenetrated 3D frameworks bridged by dicarboxylates and a 4‐bpmh linker. The 2D Cd‐dicarboxylate layers are extended along the a‐axis to form distorted square grids which are further pillared by 4‐bpmh linkers to result in a 3D pillared‐bilayer interpenetrated framework. Gas adsorption studies demonstrate that the amino‐functionalized MOF 2 shows high selectivity for CO₂ (8.4 wt % 273 K and 7.0 wt % 298 K) over CH₄, and the uptake amounts are almost double that of non‐functional MOF 1 . Iodine (I₂) adsorption studies reveal that amino‐functionalized MOF 2 exhibits a faster I₂ adsorption rate and controlled delivery of I₂ over the non‐functionalized homolog 1 .     

电感耦合等离子体质谱(ICP-MS)法测定离子吸附型稀土矿中的浸出稀土元素

对浙江某地大量的离子吸附型稀土样品进行了稀土元素(Y,La,Ce,Pr,Nd,Sm,Eu,Gd,Tb,Dy,Ho,Er,Tm,Yb,Lu)的浸提和测定实验,实验对比了氯化铵和硫酸铵溶液对矿石中稀土元素的浸出性能,选择了杂质浸出较少的硫酸铵溶液作为浸出剂,对不同稀土含量的吸附型稀土矿进行了实验,浸出方法稳定,符合工业开采要求。实验了电感耦合等离子体质谱法测定浸出液中稀土元素分量的方法,浸出液经大比例稀释并酸化后测定,精密度较好,能满足离子吸附型稀土矿评价的质量要求,方法检出限(6σ)0.005~0.26μg/g,单元素测定精密度(n=6,RSD≤6.0%),浸出稀土元素总量测定RSD≤4.0%。实际样品的实验及测定结果满意。